CUT-60HF, Pro. 60 Amp Non-touch Pilot Arc Plasma Cutter, AC 95V~260V Cutting New

Description

CUT-60HF is a newly designed with the meter and adjustment attached to the front of the machine and the filter is located inside the machine. The new and improved model makes it more convenient and easier to use. New digitally controlled 20-60 amps Plasma Cutter Machine with
advanced inverter technology and high cutting performance
. Designed for portable repair work and small business project use, CUT-60HF Air Plasma Cutter cuts a thickness of 4/5 in., and the max severance thickness is 1.2 in.
I
ncorporates advanced
Non-touch pilot arc cutting
technology, with an
excellent Arc stability. Very
easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster.
Can cut up to 4/5 in.
stainless steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron, aluminum alloy, aluminum and other conductive metals,
resulting in
straight cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many others in minutes.
95~260V wide voltage, 50/60Hz,
almost all of the voltage and frequency can be used,
and is designed for both demanding industrial work, construction. It requires less work to produce an overall better result with a cleaner cut.
Quick setup:
NPT 1/4" industry type D coupler can connect easily with the pre-installed plug on the air compressor.
The filter is located inside the machine with an
automatic air control solenoid valve.
Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-current protection, over-load protection, automatic temperature control, and fan dormancy.
Specifications:
Type:
Non-touch Pilot Arc
Plasma Cutter
Supply Power: 95~260V, 50/60Hz, 1-Phase
Rated Input Current: 230V/46 Amp, 115V/48 Amp
Cutter Current Range: 230V/20-60 Amp, 115V/20-35 Amp
Nominal DC Open Circuit Voltage: 280-Volt
Output Voltage: 104-Volt
Duty Cycle @ 104F(40c): 60% @ 60 Amp
Efficiency: 89%
Power factor: 0.93
Output Terminal Type: Direct Wire
Cooling Method: Fan Air Cooled
Gas Supply
:
Clean
D
ry
O
il-
F
ree
A
ir
Gas
Pressure
Range
:
30
-
90
psi
Recommended Gas Inlet Flow
:
5.5scfm @ 90 psi
Maximum Severance Cutting Thickness: 1.2 in.
Movement Speed: 15.0 in./min
Net Weight: 25.0 lbs.
Product Size:
15.72 x 8.52 x 12.85 in.
Package Weight: 34.8 lbs.
Shipping Size: 20.0 x 12.6 x 14.8 in.
Package Included:
CUT-60HF
Non-touch Pilot Arc
Plasma Cutter Machine.
13 Feet (SG-55/AG-60) Plasma Cutter Torch Gun Assembly.
10 Feet 300A Work Clamp Assembly, 35-50mm Lead Dines.
230V to 115V Power Adapter.
Air Filter and Pressure Gage (Installed inside the machine).
Owner’s Manual.