RME ADI-2 FS High-Precision 192 kHz 2-Channel AD/DA Converter
$ 703.99 $ 422.39
Availability: 19 in stock
SPDIF optical:
1 x optical, according to IEC 60958
Sample rate 28 kHz up
General:
Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts
Idle power consumption: 5, 2 W (430 mA @ 12V)
Max. power consumption: 10, non condensing
Mode ANA (Analog In to Analog Out):
Signal to Noise ratio (SNR) @ +19 dBu: 123 dB RMS, 126 dBA
Signal to Noise ratio (SNR) @ +13 dBu, 122 dBA
Signal to Noise ratio (SNR) @ +4 dBu:, 115 dBA
Frequency response -0.5 dB: 1 Hz – 12, 0.00016%
Channel separation: > 120 dB
Max
DA - Phones:
Output: 6.3 mm stereo TRS, unbalanced
Output impedance: 0.1 Ohm
Outp, load 100 Ohm or up: +19 dBu (6.9 Vrms)
Max po, +16 dBu, 4.9 Vrms)
THD 32 Ohm load @ +15 dBu: -110 dB, 0.0003 %
SPDIF coaxial:
RCA, according to IEC 60958
High-sensitivity input, Professional 1.4 V
Single Wire mode, sample rate 28 kHz up to 200 kHz
DIGITAL:
Clocks: Internal, ADAT In, SPDIF In
Jitter suppression of external clock, even at more than 100 ns jitter
Digital Bitcl, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176, 8 kHz, 192 kHz
Type:
Audio Interface
DA:
Signal to Noise ratio (SNR): 117 dB RMS unweighted, 120 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 10 Hz – 20.2 kHz
Frequency response, -0.5 dB: 5 Hz – 44.9 kHz
Frequency response @, -1 dB: 3 Hz – 88 kHz
THD @ -1 dBFS: -112 dB, 0.00025 %
THD+N @ -1 dBFS: -110 dB, 0.00032 %
THD @ -3 dBFS: -116 dB, 0.00016 %
Channel separation: > 110 dB
Ma, 1/4" TRS unbalanced/balanced
Output impedance, TS unbalanced 100 Ohm
Output level switchable, +13 dBu, +19 dBu @ 0 dBFS
Condition:
Open box
MPN:
ADI-2 FS
UPC:
4260123363239
ADAT:
TOSLINK
Standard: 8 channels 24 bit, up to 48 kHz
Double Speed (S/MUX): 4 channels
Form Factor:
AD/DA Converter
Digital I/O:
Digital input coaxial ground-free transformer coup, RCA (SPDIF, AES/EBU compatible)
Format Consumer SPDIF acc
Brand:
RME
Analog AD:
Signal to Noise ratio (SNR) @ +19 dBu: 117 dB RMS, 121 dBA
Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz
Frequency response @, -0.5 dB: 3 Hz – 45.5 kHz
Frequency response @, -1 dB: 2 Hz – 92.7 kHz
THD @ -1 dBFS: -114 dB, 0.00015 %
THD+N @ -1 dBFS: -112 dB, 0.00025 %
Channel separation: > 110 dB
Ma, electronically balanced
Input impedance balan, unbalanced: 18 kOhm
Input sensitivity switcha, +13 dBu, +19 dBu @ 0 dBFS
